Are we practising what we preach and are we all singing from the same hymn sheet? An exploration of teaching in paediatric caries management across UK dental schools.

BACKGROUND: The evidence underpinning caries management for children has progressed dramatically over the past 20 years. Anecdotally, this is not reflected in the teaching provided to undergraduate dental students, with the ongoing teaching of outdated methods within some dental schools. AIM: To capture the current undergraduate teaching provision and clinical treatment experience requirement relative to caries management in paediatric dentistry in UK dental schools. DESIGN: Cross-sectional analysis of current teaching methods on paediatric caries management was obtained using a piloted online data collection form. Question content included current caries teaching methods, assessment of student exposure and competence. The results were analysed descriptively. RESULTS: Of the 16 UK dental schools, 14 participated. Discrepancy in teaching content was apparent. Many schools (n = 9) taught biological caries management through therapeutic fissure sealants, yet this was not reflected in assessment and clinical requirements. Some schools (n = 4) taught amalgam placement in children, and most (n = 12) operatively taught treatments that would no longer be routinely provided in general dental practice in the UK, including primary tooth pulpotomy. CONCLUSION: There is substantial variation in the paediatric caries management techniques that are taught across UK dental schools, demonstrating a need for a national consensus to address these disparities.

A Comparative In Vitro Analysis of Antimicrobial Effectiveness and Compressive Strength of Ginger and Clove-Modified Glass Ionomer Cement.

Background Glass ionomer cement (GIC) is widely recognized for its self-adhesive characteristics and biocompatibility, making it commonly used as a restorative material. However, challenges related to limited antibacterial effectiveness and relatively low mechanical properties have hindered its widespread clinical use. Clove and ginger are recognized for their potent antimicrobial activity against numerous pathogenic microorganisms. The present study aims to enhance the clinical applicability of GIC by modifying it with clove and ginger extract. Aim The objective of the study is to assess the antimicrobial effectiveness and compressive strength of GIC modified with ginger and clove extract. Materials and methods Ginger and clove extracts were prepared and incorporated into conventional GIC at three concentrations for each, creating ginger-modified GIC groups (Group A, Group B, and Group C) and clove-modified GIC groups (Group D, Group E, and Group F), with Group G as the control (conventional GIC without modification). The antimicrobial assessment was conducted on disc-shaped GIC specimens (3.0 mm height x 6.0 mm diameter) prepared using molds. Bacterial strains were used to evaluate antimicrobial properties, with minimum inhibitory concentration (MIC) assays conducted at intervals of one to four hours for both modified and unmodified groups. Compressive strength specimens were prepared using cylindrical molds (6.0 mm height × 4.0 mm diameter), according to the ISO (International Organization for Standardization) guidelines. The evaluation was conducted using a Zwick universal testing machine (ElectroPuls® E3000, Instron, Bangalore, India), with the highest force at the point of specimen fracture recorded to determine compressive strength. Statistical analysis was conducted utilizing a one-way analysis of variance (ANOVA) alongside Tukey's post hoc test, with a significance threshold set at p < 0.01. Results The antimicrobial effectiveness of clove and ginger-modified GIC was assessed through a MIC assay, revealing a statistically significant improvement in antimicrobial potency against Streptococcus mutans and Lactobacillus within the modified groups compared to the control group (p < 0.01). Increased extract concentration correlated with enhanced antimicrobial activity. Clove-modified GIC exhibited superior antimicrobial efficacy compared to ginger extract. Compressive strength was higher in clove-modified GIC groups (p < 0.01), with Group F showing a maximum value of 175.88 MPa, while other modified groups demonstrated similar results to the control, with a value of 166.81 MPa (p > 0.01). Conclusion The study concludes that both clove-modified GIC and ginger-modified GIC exhibited antimicrobial activity against Streptococcus mutans and Lactobacillus species. The antimicrobial activity was notably higher in clove-modified GIC compared to ginger-modified GIC. Additionally, the compressive strength of clove-modified GIC surpassed all other groups. Thus, clove-modified GIC emerges as a promising restorative material for addressing recurrent caries. Future investigation is necessary to assess the long-term durability of the material.

Deep Margin Elevation - A Retrospective Clinical Study.

PURPOSE: The aim of this retrospective study was to assess the short- to mid-term restorative and periodontal outcome of deep margin elevation (DME) performed using resin composite. MATERIALS AND METHODS: Twenty-eight teeth treated with DME and indirect adhesive restorations were followed-up for a mean of 25.4 months (minimum: 12 months). Clinical and radiographic examination assessed the adaptation of the DME material and indirect restorations, presence of recurrent caries or discoloration, periodontal health at DME and non-DME sites, and periapical health. RESULTS: The overall success rate was 96.6%. One tooth showed signs and symptoms of apical pathology after 34 months following DME. No caries, discoloration, or periodontal pockets were detected in any of the treated teeth. DME had no detrimental effect on the gingival/periodontal health or plaque accumulation. There was no correlation between the distance from the DME material to the marginal bone level and pocket depth, gingival inflammation, and plaque accumulation (p > 0.05). CONCLUSION: Deep margin elevation might be considered a safe procedure for teeth with deep subgingival proximal caries in the short- and mid-term.

Color match of single-shade restorations after professional dental bleaching: An in vitro study.

Background: Restorative dentistry aims to reproduce natural tooth shades through resin composites that must be layered to obtain colors, opacities, and translucencies, and therefore, clinical success is operator skill dependent. Aims: The purpose of this study is to evaluate the color shift of single-shade composite restorations before and after dental bleaching. Materials and Methods: Eighty human extracted posterior teeth were restored with four single-shade composites (Omnichroma OM; Clearfil Majesty ES-2 Universal CL; Essentia Universal ES; Venus Diamond One VE) (n = 20 each). Standardized V class cavities were prepared on buccal side. VITA Easyshade V spectrophotometer was used to register VITA color and color coordinates 24 h before (T0), 24 h after (T1), and 1 week after (T2) dental bleaching (Opalescence Boost PF 40%). Color differences (ΔEab) and (ΔWID) were calculated and subjected to statistical analysis. Statistical Analysis: Categorical variables were analyzed using Pearson Chi-square, and data from color coordinates were analyzed using one-way analysis of variance and Tukey's multiple comparison test with Bonferroni correction. Paired t-tests were performed to compare continuous measures between groups and treatment time. Results: Instrumental evaluations revealed statistically significant differences between materials (P < 0.05) with lower values for ES and VE samples followed by CL and OM at T0 and T1. At T2, OM and CL ΔEab values decrease getting closer to ES and VE. Conclusion: Single-shade composites seem to match with the surrounding bleached tooth.

Comparative Evaluation of Antimicrobial Effectiveness and Compressive Strength in Neem and Lemongrass-Modified Glass Ionomer Cement: An In Vitro Study.

Background Glass ionomer cement (GIC) demonstrates biocompatibility and fluoride ion release, indicating their potential to inhibit a wide range of bacteria, although this remains uncertain. Lemongrass and neem are recognized for their potent antimicrobial activity against numerous pathogenic microorganisms. The objective of the study is to evaluate the antimicrobial effectiveness and compressive strength of GIC modified with neem and lemongrass. Methodology Lemongrass and neem were incorporated into conventional GIC at varying concentrations. Group I - neem-modified GIC (0.5%, 1%, 2%), group II - lemongrass-modified GIC (0.5%, 1%, 2%), and group III (non-modified GIC as a control group). The disk-shaped specimens were then compared to unmodified GIC (control). Antimicrobial effectiveness was assessed using the minimal inhibitory concentration (MIC) assay against Streptococcus mutans and Lactobacillus. Compressive strength was assessed using a Universal Testing Machine, with a crosshead speed set to 0.5 mm per minute. Statistical analysis was conducted with a significance level set at p < 0.05. Results Neem modification displayed superior antimicrobial effectiveness against both Streptococcus mutans and Lactobacillus at all concentrations when compared to the control, with 2% showing the least mean value of 0.262. In contrast, lemongrass modification exhibited a significant difference in effectiveness against Streptococcus mutans but no difference against Lactobacillus. Neem modification demonstrated superior performance compared to lemongrass (p < 0.05). Both modified groups showed no significant impact on compressive strength. Conclusions Neem-modified GIC demonstrated the highest antimicrobial efficacy against Streptococcus mutans and Lactobacillus without altering its compressive strength. This suggests its potential as a promising alternative material in restorative dentistry. Additional in vivo investigations are needed to assess the extended-term effectiveness of the material.

Investigating the Potential of Acacia nilotica-Enriched Glass Ionomer Cement: An Analysis of Antimicrobial Activity and Compressive Strength.

Background According to existing literature, introducing natural antibacterial agents into glass ionomer cement (GIC) has been associated with potential negative impacts on their strength properties. Hence, this study aims to explore the antibacterial effectiveness of glass ionomer cement enriched with Acacia nilotica and subsequently assess its compressive strength characteristics. Aim The objective of the study is to assess the antimicrobial effectiveness and compressive strength of glass ionomer cement modified with Acacia nilotica. Materials and methods  The plant extract was incorporated into the conventional glass ionomer cement in three different proportions (powder GIC: extract: liquid GIC), divided into group I, group II, and group III with ratios of 2:1:1, 3:1:2, and 3:2:1 respectively. Additionally, a control group denoted as group IV was included without any modifications. Subsequently, the specimens were prepared, and their chemical structure was analyzed using Fourier transform infrared spectroscopy (FTIR), followed by testing for antimicrobial activity using the minimum inhibitory concentration (MIC) assay against Streptococcus mutans and Lactobacillus. The assessment of compressive strength was conducted following ISO 9917-1:2007 standards, and the recorded values represent the maximum force the specimen could withstand before fracturing. Results The antimicrobial effectiveness against Streptococcus mutans and Lactobacillus exhibited a notable increase in all modified specimens compared to the control group, with a significance level of p<0.05. Additionally, significant improvements in compressive strength were observed in group III (183.49±2.99) when compared to the remaining groups. The higher concentrations of the plant extract resulted in superior outcomes. Conclusion Therefore, the incorporation of Acacia nilotica into GIC shows promising potential as a restorative material. These investigations can provide valuable insights into the material's performance and durability, contributing to its potential application in dental restorations. Future research is needed to thoroughly investigate the bonding chemistry between Acacia nilotica and GIC, as well as to assess the extent of microleakage.

Effect of Immediate Dentin Sealing on the Bonding Performance of Indirect Restorations: A Systematic Review.

The popular immediate dentin sealing (IDS) technique is used to improve the bond strength of indirect restorations. This systematic review assessed whether bond strength is affected by the type of aging conditions, bonding agents, flowable resin composites, impression materials, temporary materials, and/or resin cement used within the IDS procedure. A comprehensive database search of PubMed, Embase, Scopus, Ovid Medline, Web of Sciences, Cochrane Library, Dentistry & Oral Sciences Source, and ProQuest was carried out up to 30 January 2024 without publication year or language limitations. Only in vitro full-texts regarding the effect of IDS on bond strength were included, and the quality of their methods was assessed via a Risk of Bias (RoB) test. In total, 1023 pertinent studies were initially found, and 60 articles were selected for review after screening for the title, abstract, and full texts. IDS application improves the bond strength of indirect restorations to dentin and reduces the negative effects of temporary materials on the bond durability of final indirect restorations. Filled dentin bonding agents or combinations with flowable resin composite are preferred to protect the IDS layer from conditioning procedures.

The Impact of a Web-Based Restorative Dentistry Course on the Learning Outcomes of Dental Graduates: Pre-Experimental Study.

BACKGROUND: Restorative dentistry plays a crucial role in dental practice, necessitating professionals to stay abreast with the latest advancements in the field. The advancement of technology has made web-based learning a widely used method of education delivery in dentistry, providing learners with extensive information and flexibility. OBJECTIVE: This study aims to evaluate how effective an online educational course in restorative dentistry is for dental graduates in Syria. METHODS: This study used a pre-experimental study design, with pretest and posttest assessments to measure changes in participants' knowledge and skills. A total of 21 dental graduates completed the online course in restorative dentistry, which was hosted on Moodle, using the learning management system of the Syrian Virtual University. Participants were provided with a suggested learning sequence and had the flexibility to navigate the course on their own and at their own pace. The course was developed based on the principles of web course design and web-based course development using the ADDIE (Analysis, Design, Development, Implementation, and Evaluation) general instructional design model. The pretest and posttest assessments consisted of 50 multiple-choice questions with a single correct answer, aligning with the course content. Furthermore, participants were asked to complete a course acceptance survey upon finishing the course. RESULTS: The results showed a significant improvement in the participants' knowledge of restorative dentistry, supported by a statistically significant P value of less than .05. The effect size of the difference between the pre and posttest indicated that the effect size, as indicated by ω2, demonstrated a significant 62.1% difference between the pre and posttest, indicating a high and statistically significant effect. Furthermore, the value derived from the Haridy obtained work ratio formula indicated that the educational program was effective, with an effectiveness amount of 3.36%. Additionally, 93% (n=19) of respondents expressed confidence in having gained the expected benefits from the educational course upon its completion. CONCLUSIONS: The findings indicated a notable enhancement in the participants' understanding of restorative dentistry. The participants' high satisfaction rate and positive feedback from the course acceptance survey further emphasize the favorable reception of the web-based learning approach. This study highlights the potential of web-based learning in dental education, opening the door for future research in this area. The findings of this study carry important implications for the design and implementation of web-based educational programs in dentistry, suggesting that such programs can serve as an effective tool for continuous professional development in the field.

Applications of graphene oxide and reduced graphene oxide in advanced dental materials and therapies.

The graphene family of nanomaterials acquired significant attention in the field of dentistry due to a range of interesting properties. Graphene oxide (GO) and reduced graphene oxide (rGO) are the major graphene derivatives that are widely used in dental applications. These derivatives exhibit excellent mechanical properties, superior biocompatibility, good antibacterial properties, extreme chemical stability, and favorable tribological characteristics, thus representing highly materials for dentistry. The amphiphilic nature of GO allows covalent and noncovalent modifications that are favorable for biomedical applications. Graphene can influence the differentiation of dental pulp stem cells (DPSCs) and enhance the properties of other biomaterials. Here, we review the dental applications of GO or rGO with regards to antimicrobial activity, therapeutic drug delivery, restorative dentistry, implants, pulp regeneration, bone regeneration, periodontal tissue regeneration, biosensors, and tooth whitening.

Initial bacterial adherence and biofilm formation on novel restorative materials used in paediatric dentistry.

OBJECTIVE: To evaluate the initial bacterial adherence and biofilm formation on novel restorative materials in paediatric dentistry and compare the results to stainless steel crown and primary enamel. MATERIALS AND METHODS: Twenty-five samples (Diameter = 4 mm) from five restorative materials (Tetric Power Fill light cured for 3 s or 10 s, Fuji II LC, Equia Forte HT Fil, Cention Forte, Stainless-steel crown) and primary enamel were prepared. Four samples served for recording of surface roughness (Ra) using a contact profilometer, 21 samples were incubated in stimulated human saliva for 2 h (initial bacterial adherence) and 72 h (biofilm formation) and served to determine ion releasing and bacterial growth. After 2 and 72 h, the number of colony-forming units (CFU) per ml was counted and expressed in Log10 CFU/ml. Data were analysed with two-way ANOVA and Tuckey's multiple comparisons test (p < 0.05). RESULTS: All tested materials showed similar initial bacterial adherence (p > 0.1). Stainless steel crown showed statistically significantly less biofilm formation than all other tested materials (p ≤ 0.02), except for Fuji II LC (p = 0.06). In terms of biofilm formation, the differences between all tested materials were not statistically significant (p ≥ 0.9). SIGNIFICANCE: Novel restorative materials in paediatric dentistry show similar initial bacterial adherence and biofilm formation. However, compared to other restorative materials, stainless steel crowns demonstrate the lowest level of biofilm formation. Ion-releasing materials may not necessarily show better antimicrobial properties than conventional materials.

A Comparative In Vitro Analysis of Antimicrobial Effectiveness and Compressive Resilience in Chirata and Terminalia arjuna Modified Glass Ionomer Cement.

BACKGROUND: Glass ionomer cements are commonly utilized in dental restorations due to their biocompatibility, strong chemical bond with dental tissues, and ability to resist tooth decay. However, their effectiveness can be compromised by the presence of persistent cavity-causing microorganisms. Therefore, it is essential to consider incorporating antibacterial agents into these restorative materials. Swertia chirayita (S. chirayita) and Terminalia arjuna (T. arjuna) are well-known for their rich composition of phytochemicals that can potentially inhibit the growth of bacteria. Hence, the current research is focused on modifying glass ionomer cement with Chirayita and T. arjuna extracts to enhance its antibacterial properties. AIM: This research aims to determine the antimicrobial efficacy and compressive strength of glass ionomer cement modified with Chirayita and T. arjuna extracts. METHODOLOGY: Plant extracts were prepared from both Chirayita and T. arjuna. The powder and liquid components of conventional glass ionomer cement (GIC) were mixed, followed by adding these extracts at three different concentrations. To assess antimicrobial properties, typical strains of Streptococcus mutans and Lactobacillus were employed to test both the modified GIC and unmodified GIC (used as a control). For Chirayita and T. arjuna-modified GIC, minimum inhibitory concentration (MIC) assays were conducted at three different concentrations. MIC was assessed at various time intervals ranging from 1 to 4 hours for modified and unmodified groups. Moreover, compressive strength was measured using cylindrical molds. The highest force exerted at the point of specimen fracture was recorded to calculate the compressive strength values in megapascal (MPa). RESULTS: The antimicrobial efficiency of Chirata and T. arjuna-modified GIC was evaluated using a MIC assay, indicating a statistically significant enhancement in antimicrobial potency against S. mutans and Lactobacillus within the modified groups in contrast to the control group (p<0.05). However, there were no notable changes in compressive strength when comparing the control group to the modified groups (p>0.05). CONCLUSION: The antimicrobial effectiveness against S. mutans was observed to be greater in both T. arjuna and Chirayita-modified GIC. In the case of Lactobacillus, Chirayita-modified GIC exhibited more pronounced antimicrobial properties compared to T. arjuna. Importantly, both extracts did not alter the compressive strength of Conventional (unmodified) GIC. Hence, Chirayita-modified GIC appears to be a promising restorative material for combatting recurrent caries. Additional investigation is required to assess the material's stability over an extended period.

A narrative review of minimally invasive techniques in restorative dentistry.

This narrative review aimed to provide a comprehensive overview of minimal invasive dentistry (MID) by synthesizing relevant articles obtained from various sources, including electronic databases such as PubMed, SCOPUS, EMBASE, the COCHRANE library, and Science Direct, as well as through manual searches of cross-references and textbooks. The search employed MeSH terms and keywords related to MID, such as "minimally invasive dentistry," "atraumatic restorative treatment (ART)," "MID," and "minimum intervention dentistry." The inclusion criterion was English-language articles published between the years 2000 and June 2023 that aligned with the study objectives. After a thorough assessment of the included articles, 34 high-quality articles were selected for this review. The selected articles elucidate the characteristics of MID, the application of the ART, and the principles of minimum intervention in dentistry. Animal-based studies and narrative reviews on MID were excluded from the analysis. This narrative review serves as a valuable resource for dental professionals, researchers, and educators interested in staying abreast of the latest developments and evidence in the field of MID.

Importance of periodontal phenotype in periodontics and restorative dentistry: a systematic review.

BACKGROUND: Periodontal phenotype is regarded to be one of the key factors influencing the efficacy of restorative therapies in dental practice. The objective of the systematic review was to explore the importance of thin and thick periodontal phenotypes and how they affect the outcome of periodontal and restorative therapies by looking at a number of academic publications from various online databases. METHODS: Following the PRISMA guidelines (Preferred Reporting Items for Systematic Review standards), relevant data will be searched and retrieved from three significant scientific databases, including PubMed, EBSCO, and Scopus. The articles with full texts that matched the keywords and published in English between 2018 and 2023 were taken into consideration. RESULTS: The majorities of these articles were based on the type of periodontal phenotype and their impact on periodontal and restorative treatment outcomes were selected. The initial search yielded a total of 530 articles. Only 273 were relevant to the review's objectives, and these were considered for determining eligibility. Only 20 publications were eligible for analysis. CONCLUSION: Understanding these anatomical aspects of periodontal phenotype is crucial to both periodontology and restorative dentistry. The clinical outcome of restorative, prosthetic, orthodontic, surgical, and periodontal therapies is determined in large part by the periodontal phenotype, which also plays a significant role in clinical failure or success in dental treatments. TRIAL REGISTRATION: This study protocol registered with the International Prospective Register of Systematic Reviews (PROSPERO) dated 16th June 2023 with the registration ID CRD42023432568.

Myocentric relation in an additive esthetic rehabilitation within a fully digital workflow.

In recent years, tooth wear has been a growing concern in dentistry as it has become increasingly prevalent among the population. At the same time, the development of adhesive techniques has enabled minimally invasive treatment protocols, with the goal of preserving and protecting teeth for as long as possible. This clinical report presents the case of a full-mouth rehabilitation patient with tooth wear who was treated using minimally invasive techniques. Esthetic and functional outcomes were designed and monitored using digital tools such as digital impressions, 3D facial scans, a digital tooth library, transcutaneous electrical nerve stimulation (TENS), MRI, and kinesiographic (KS) analysis throughout the treatment. To increase the vertical dimension of occlusion, instead of using traditional centric relation (CR) methods, a myocentric relation (MCR) technique was employed. This approach allowed the clinician to maintain the occlusal Class I situation, avoiding more invasive orthodontic treatment or maxillofacial surgery and resulting in reduced morbidity, treatment time, and cost for the patient. At the 1-year follow-up, good patient adaptation was shown, suggesting that the MCR concept is a viable alternative to conventional CR methods in appropriate cases.

Clinical guidelines for posterior restorations based on Coverage, Adhesion, Resistance, Esthetics, and Subgingival management. The CARES concept: Part III ­ subgingival margins, "ferrule" design, and posts in severely compromised teeth

Despite the clear advances regarding the restoration of posterior teeth, especially with the minimally invasive approach, there are still several topics where the available scientific evidence does not provide clear answers in terms of clinical decisions. The indications, differences, and clinical protocols for partial adhesive restorations (onlays, overlays, and endocrowns) and resistance form restorations (full-contour resistive crowns) were presented in Parts I and II of the present article series based on Coverage of susceptible cusps, Adhesion advantages and limitations, Resistance forms to be implemented, Esthetic concerns, and Subgingival management - the CARES concept. Now, in Part III, the focus is on different approaches of managing subgingival areas, gaining "ferrule" design, and the role of posts on the restorability strategies of severely compromised teeth.

Extended porcelain veneers in the maxillary anterior region. A retrospective study with an up to 27-year follow-up

AIM: The aim of the present retrospective study was to evaluate the long-term results, including technical and biologic outcomes, of maxillary extended porcelain veneers with an incisal edge thickness above 2 mm. MATERIALS AND METHODS: Patients treated with extended porcelain veneers performed by a single clinician at University of Geneva between 1990 and 2003 were identified and invited to an examination. Of the 37 identified patients, 10 patients with 50 veneers agreed to be examined and were included. A clinical examination was performed to assess survival rates as well as technical and biologic outcomes (modified United States Public Health Services criteria). Patient records were also reviewed to retrieve patient and reconstruction data and every complication event. Patient-reported outcome measures (PROMs) were evaluated using a visual analog scale to measure esthetic satisfaction, functional and phonetic comfort, masticatory improvement, tooth sensitivity, and acceptance of restoration replacement in case of failure. Data were descriptively analyzed, and Kaplan-Meier survival estimators were computed for survival rates and complication events. RESULTS: The survival rate of the veneers was 96% after a mean follow-up of 20.7 ± 3.7 years in function. The technical complication rate amounted to 30%, including two failures, nine repairable fractures, three cracks, and one displacement due to trauma. No cavitated caries lesions or endodontic complications were registered. PROMs were very high for esthetic satisfaction and phonetic comfort. CONCLUSIONS: Within the limitations of the present retrospective study, extended porcelain veneers appear to be a successful long-term treatment option in terms of clinical outcomes and patient satisfaction.

Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering.

BACKGROUND: Various methods can be used for creating zirconia dental restorations, including 3-dimensional (3D) printing and computer-aided design/ computer-aided manufacturing (CAD/CAM) milling. The fused deposition modeling (FDM) printing method for zirconia presents numerous advantages, albeit research on the mechanical properties of these materials and resultant restorations remains scarce. Such developments are undeniably intriguing and warrant further investigation. The objective of the present study was to evaluate the impact of the sintering firing cycle (Conventional vs. Speed sintering) on the flexural strength, flexural modulus, and Vickers Microhardness of milled vs. FDM printed zirconia. METHODS: A total of 60 bars (2 × 5 × 27 mm) were fabricated for flexural strength testing, along with 40 discs (12 × 1.5 mm) for Vickers microhardness testing. Half of the specimens underwent conventional sintering, while the other half underwent a speed sintering cycle. The flexural strength and modulus were determined by a three-point bending test in a universal testing machine. The microhardness of the specimens was evaluated using a Vickers microhardness tester. Statistical analysis was performed using a two-way ANOVA test with a post-hoc Tukey test (p < 0.05). RESULTS: CAD/CAM milled zirconia had significantly higher flexural strength and modulus than FDM-printed zirconia. The sintering process did not significantly affect the flexural strength or modulus of milled or FDM-printed zirconia. The milled speed sintering group had significantly higher values in the Vickers microhardness test compared to the other groups. CONCLUSIONS: The mechanical properties of FDM-printed zirconia specimens were not found to be comparable to those of milled zirconia. Speed sintering cycle may produce milled zirconia restorations with similar flexural strength and modulus to conventional sintering, and even higher Vickers Microhardness values.

Properties of Nanohybrid Dental Composites-A Comparative In Vitro Study.

(1) Background: the current study investigated three nanohybrid composites: two commercial products ClearfilMajestyTM (CM) and HarmonizeTM (HU), compared with an experimental product PS2. (2) Methods: Two sample types were molded using Teflon dies. The first sample type was represented by standard discs (20 mm diameter and 2 mm thickness) (n = 60, 20/each material), used for surface conditioning investigation, specifically roughness monitoring and color stability analysis using AFM and the CIELab test, respectively. The second sample type was a standard cylindrical specimen (4 mm diameter and 6 mm height) for compression testing (n = 60, 20/each material). After complete polymerization, the samples were ground with sandpaper and further polished. The filler size and distribution in the polymer matrix were investigated with SEM. Data were statistically analyzed using the Anova Test followed by Tukey's post hoc test on the Origin Lab 2019 software produced by OriginLab Corporation, Northampton, MA, USA. (3) Results: A mono-disperse system was identified in HU samples, while CM and PS2 revealed both nano- and microfiller particles. The samples' observation after immersion in coffee and tea indicated that a lower roughness combined with optimal filler lamination within the polymer matrix assured the best color preservation. The compression strength was lower for the HU sample, while higher values were obtained for the complex filler systems within CM and PS2. (4) Conclusions: the behavior of the investigated nanohybrid composites strongly depends on the microstructural features.

Agenesis of the maxillary permanent lateral incisors with the deciduous retained: Conservative and biomimetic approach using the BAIR technique.

OBJECTIVE: Agenesis of the maxillary permanent lateral incisors is a condition that requires treatment aimed at improving the esthetics, even at an early age. However, traditional therapeutic protocols are long, invasive and have limitations and contraindications imposed by the age of the patient. CLINICAL CONSIDERATIONS: Recent developments in restorative dentistry have provided a new approach to this clinical situation, in particular when the deciduous laterals are retained. We report two cases regarding the management of missing lateral incisors using Biologically Active Intrasulcular Restoration (BAIR) technique. The BAIR technique allows us to transform the shape of the deciduous lateral incisor into the permanent, acting both on the dental morphology and proportions, and on the appearance of the soft tissues and the gingival parables. CONCLUSIONS: The BAIR technique is a valid approach to cases of agenesis of the maxillary permanent lateral incisors, when the deciduous are retained. It does not require any preparation of the dental tissues, is reversible and minimally invasive. It is applicable to patients of all ages, and results are obtained in a single appointment. CLINICAL SIGNIFICANCE: The BAIR technique allows a biomimetic conservative approach for the rehabilitation of congenitally missing permanent lateral incisors, when the deciduous are retained. It is a non-invasive protocol and effective in successfully restoring esthetics.

A bibliometric and Altmetric analysis of the 100 top most cited articles on dentin adhesives.

OBJECTIVE: This study aimed to identify the 100 top-cited articles on dentin adhesives utilizing comprehensive bibliometric and altmetric analyses. MATERIALS AND METHODS: The Institute of Scientific Information Web of Knowledge database was used to compile the top-cited articles published from 1945 through February 12, 2023. Citation counts were manually retrieved for each article from Scopus, Google Scholar, Dimensions, and Altmetric. The articles were analyzed in terms of their number of citations, year, journal name, author (name, institution, and country), and type and specific field of study. We used descriptive statistics to summarize the results. RESULTS: The analysis revealed that the top 100 cited articles originated from 18 English-language journals and collectively accumulated a remarkable 34526 citations. The article with the highest number of citations garnered 1288 references. Among authors, Van Meerbeek B. stood out with nine articles and 4650 citations, followed by Pashley D.H. with six articles and 2769 citations. Japan was the leading contributor by country, while the Catholic University of Leuven led in terms of institutions with 20 articles. CONCLUSION: According to this study, basic research and review articles garnered the most citations, respectively. The citation analysis revealed different trends for researchers, the first being that researchers have focused on basic fields such as the ultramorphology of dentin and adhesive interfaces, followed by bond strength to dentin. Two studies on clinical experiences suggested that studies with high-level evidence, such as systematic reviews, meta-analyses, or randomized controlled clinical trials, are required. CLINICAL RELEVANCE: It is identified that more studies with high-level evidence-based research are needed in the field of dental adhesives.